Paper Slitter Rewinder

Automatic Surface Drive Slitter Rewinder

Model:ASW-1250R

Main Use
Receipt roll, FAX roll etc.
Main Features
Coreless and non adhesive winding.
Automatic processing including packaging operation.
End mark printing, pressing and side face printing are also automated.
Web width 1100mm Min. slitting width

35mm

Roller width 1250mm Slitting method

Wrap shear slitting

Unwinding dia. φ1000mm Mechanical speed 300m/min.
Unwinding core size 3 inches

Rewinding method

With core

Coreless

Non adhesive

Rewinding dia. φ45 - 120mm
Rewinding core size φ18 - 33mm

*Specifications can be customized according to your requirements.

Single Shaft Center Drive Slitter

Model:HSF-12XI

Main Use
Silicon paper
Main Features
Suitable for silicon paper slitting.
To prevent the slip, large and high capacity suction roller is installed.
High precision winding by shaft bending correction device and support roller.
Web width 1750mm Min. slitting width

200mm

Roller width 1850mm Slitting method

Wrap shear slitting

Unwinding dia. φ1500mm Mechanical speed 600m/min.
Unwinding core size 3/6 inches

Suction roller

φ450mm

Rewinding dia. φ1500mm shaft bending correction device Reverse moment generation mechanism
Rewinding core size 3/6 inches Support roller Automatic pressure control

*Specifications can be customized according to your requirements.

Surface Drive Slitting Rewinder

Model:HSW-12XN

Main Use
Various paper
Main Features
For jumbo paper roll.
Automatic slitting position NC device is installed.
Wide range from a low to high tension control.
Web width 2400mm Rewinding core size

3/6 inches

Roller width 2500mm Min. slitting width

135mm

Unwinding dia. φ2000mm Slitting method Tangent shear slitting
Unwinding core size 3/6 inches

Mechanical speed

1200m/min.

Rewinding dia. φ2000mm Rewinding method Surface drive type

*Specifications can be customized according to your requirements.

Single Shaft Center Drive Slitter Rewinder

Model:HSF-906

Main Use
Various paper
Main Features
High precision rewinding by touch roller with precision regulator.
Hydraulic power lifter for unloading the finish roll is installed.
Exchangeable rewinding shaft, 3 inches and 2 inches.
Web width 900mm Rewinding core size

2/3 inches

Roller width 1000mm Min. slitting width

8mm

Unwinding dia. φ1000mm Slitting method Wrap shear slitting
Unwinding core size 3/6 inches Mechanical speed

250m/min.

Rewinding dia. φ650mm

*Specifications can be customized according to your requirements.

Duplex Turret Slitter Rewinder

Model:HDT-203

Main Use
Label
Main Features
Turret rewinder for improving productivity.
Counting the number of carried labels and cuts the end when the counted number reaches the set number.
The various sensors detect the defect such as separation and gap of label.
Web width 270mm Min. slitting width

20mm

Roller width 300mm Slitting method

Wrap shear slitting

Unwinding dia. φ800mm Mechanical speed 200m/min.
Unwinding core size 3 inches  Option

Trimming winder

Trimming cut blower

Inspection unit

Rewinding dia. φ300mm
Rewinding core size 3 inches

*Specifications can be customized according to your requirements.

Single Shaft Center Drive Slitter Rewinder

Model:HSF-904

Main Use
Label
Main Features
Standard slitter rewinder for label.
Counting the number of carried labels and cuts the end when the counted number reaches the set number.
The various sensors detect the defect such as separation and gap of label.
Web width 350mm Min. slitting width

20mm

Roller width 400mm Slitting method

Wrap shear slitting

Unwinding dia. φ650mm Mechanical speed 250m/min.
Unwinding core size 3 inches  Option

Splicing table

Trimming unit

Inspection unit

Rewinding dia. φ450mm
Rewinding core size 3 inches

*Specifications can be customized according to your requirements.

Page Top